CloudFormation — Boto 3 Docs 1.9.42 documentation

[REQUIRED]

The name or unique stack ID of the stack to update.

Structure containing the template body with a minimum length of 1 byte and a maximum length of 51,200 bytes. (For more information, go to Template Anatomy in the AWS CloudFormation User Guide.)

Conditional: You must specify only one of the following parameters: TemplateBody , TemplateURL , or set the UsePreviousTemplate to true .

Location of file containing the template body. The URL must point to a template that is located in an Amazon S3 bucket. For more information, go to Template Anatomy in the AWS CloudFormation User Guide.

Conditional: You must specify only one of the following parameters: TemplateBody , TemplateURL , or set the UsePreviousTemplate to true .

Reuse the existing template that is associated with the stack that you are updating.

Conditional: You must specify only one of the following parameters: TemplateBody , TemplateURL , or set the UsePreviousTemplate to true .

Structure containing the temporary overriding stack policy body. You can specify either the StackPolicyDuringUpdateBody or the StackPolicyDuringUpdateURL parameter, but not both.

If you want to update protected resources, specify a temporary overriding stack policy during this update. If you do not specify a stack policy, the current policy that is associated with the stack will be used.

Location of a file containing the temporary overriding stack policy. The URL must point to a policy (max size: 16KB) located in an S3 bucket in the same region as the stack. You can specify either the StackPolicyDuringUpdateBody or the StackPolicyDuringUpdateURL parameter, but not both.

If you want to update protected resources, specify a temporary overriding stack policy during this update. If you do not specify a stack policy, the current policy that is associated with the stack will be used.

A list of Parameter structures that specify input parameters for the stack. For more information, see the Parameter data type.

• (dict) --

  The Parameter data type.

  • ParameterKey (string) --

    The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.

  • ParameterValue (string) --

    The input value associated with the parameter.

  • UsePreviousValue (boolean) --

    During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.

  • ResolvedValue (string) --

    Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <>`__ in the template.

A list of values that you must specify before AWS CloudFormation can update certain stacks. Some stack templates might include resources that can affect permissions in your AWS account, for example, by creating new AWS Identity and Access Management (IAM) users. For those stacks, you must explicitly acknowledge their capabilities by specifying this parameter.

The only valid values are CAPABILITY_IAM and CAPABILITY_NAMED_IAM . The following resources require you to specify this parameter: AWS::IAM::AccessKey , AWS::IAM::Group , AWS::IAM::InstanceProfile , AWS::IAM::Policy , AWS::IAM::Role , AWS::IAM::User , and AWS::IAM::UserToGroupAddition . If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.

If you have IAM resources, you can specify either capability. If you have IAM resources with custom names, you must specify CAPABILITY_NAMED_IAM . If you don't specify this parameter, this action returns an InsufficientCapabilities error.

For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates .

• (string) --

The template resource types that you have permissions to work with for this update stack action, such as AWS::EC2::Instance , AWS::EC2::* , or Custom::MyCustomInstance .

If the list of resource types doesn't include a resource that you're updating, the stack update fails. By default, AWS CloudFormation grants permissions to all resource types. AWS Identity and Access Management (IAM) uses this parameter for AWS CloudFormation-specific condition keys in IAM policies. For more information, see Controlling Access with AWS Identity and Access Management .

• (string) --

The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to update the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation always uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.

If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.

The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.

• RollbackTriggers (list) --

  The triggers to monitor during stack creation or update actions.

  By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:

  • To use the rollback triggers previously specified for this stack, if any, don't specify this parameter.
  • To specify new or updated rollback triggers, you must specify all the triggers that you want used for this stack, even triggers you've specifed before (for example, when creating the stack or during a previous stack update). Any triggers that you don't include in the updated list of triggers are no longer applied to the stack.
  • To remove all currently specified triggers, specify an empty list for this parameter.

  If a specified trigger is missing, the entire stack operation fails and is rolled back.

  • (dict) --

    A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.

    • Arn (string) -- [REQUIRED]

      The Amazon Resource Name (ARN) of the rollback trigger.

      If a specified trigger is missing, the entire stack operation fails and is rolled back.

    • Type (string) -- [REQUIRED]

      The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.

• MonitoringTimeInMinutes (integer) --

  The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.

  The default is 0 minutes.

  If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.

  If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.

Structure containing a new stack policy body. You can specify either the StackPolicyBody or the StackPolicyURL parameter, but not both.

You might update the stack policy, for example, in order to protect a new resource that you created during a stack update. If you do not specify a stack policy, the current policy that is associated with the stack is unchanged.

Location of a file containing the updated stack policy. The URL must point to a policy (max size: 16KB) located in an S3 bucket in the same region as the stack. You can specify either the StackPolicyBody or the StackPolicyURL parameter, but not both.

You might update the stack policy, for example, in order to protect a new resource that you created during a stack update. If you do not specify a stack policy, the current policy that is associated with the stack is unchanged.

Amazon Simple Notification Service topic Amazon Resource Names (ARNs) that AWS CloudFormation associates with the stack. Specify an empty list to remove all notification topics.

• (string) --

Key-value pairs to associate with this stack. AWS CloudFormation also propagates these tags to supported resources in the stack. You can specify a maximum number of 50 tags.

If you don't specify this parameter, AWS CloudFormation doesn't modify the stack's tags. If you specify an empty value, AWS CloudFormation removes all associated tags.

A unique identifier for this UpdateStack request. Specify this token if you plan to retry requests so that AWS CloudFormation knows that you're not attempting to update a stack with the same name. You might retry UpdateStack requests to ensure that AWS CloudFormation successfully received them.

All events triggered by a given stack operation are assigned the same client request token, which you can use to track operations. For example, if you execute a CreateStack operation with the token token1 , then all the StackEvents generated by that operation will have ClientRequestToken set as token1 .

In the console, stack operations display the client request token on the Events tab. Stack operations that are initiated from the console use the token format Console-StackOperation-ID , which helps you easily identify the stack operation . For example, if you create a stack using the console, each stack event would be assigned the same token in the following format: Console-CreateStack-7f59c3cf-00d2-40c7-b2ff-e75db0987002 .